
Reference GF6-44-SA-N-SQ-AO
6 020 €Price incl. VAT
French manufacture, Magny-en-Vexin.
Insured and tracked delivery, France and international.
Engraving possible on the case back or on the oscillating weight. An engraved watch may neither be returned nor exchanged.
Black skeletonised dial, case in black PVD stainless steel: this GF6-44-SA leaves orange the task of animating the whole, from the perforated hands to the springs on which the movement rests. This Shock Absorbers system, with its six dampers and self-regulating mass, allows one to play golf without removing one's automatic watch. The bracelet repeats the orange on its holes and stitching, and the crown combines it with a touch of white ceramic.
A 44 mm case in black PVD stainless steel: the GF6-44-SA Skeleton Black Orange is a three-hand automatic watch. The dial is skeletonised, in black. As for the hands: perforated orange with tip coated in Superluminova®. The colour scheme: orange lacquer, springs and strap perforations. It sits within the Golf universe. Inside beats the ETA 2824-2 calibre, skeletonised by hand in the workshop: 25 jewels, 28,800 vibrations per hour and a 38-hour power reserve. It benefits from the Shock Absorbers system, introduced by the house in 2014: helical springs suspend the movement, with no rigid contact with the case middle. Add to that water resistance to 100 metres, a weight of 80 grams, sapphire crystal front and back and a screw-down crown.
The GF6 is the large case of the Golf collection: 44 mm against 38 for the GF7, the ETA 2824-2 calibre, a crown with white ceramic, and the only one of the two available in carbon. Like every Golf watch, it rests on the Shock Absorbers system, with visible springs.
The case is machined from the solid and the watch assembled by hand in Magny-en-Vexin (Val-d'Oise, France) by Bernard Richards Manufacture, an Entreprise du Patrimoine Vivant. Made to order, it takes 6 to 8 weeks; it carries a 3-year warranty, 6 with the extension, and its servicing and repairs are carried out at the manufacture.
The technology equipping this watch
Six helical steel springs — three on the front face, three on the rear face — encase the movement and mechanically isolate it from the case. The calibre no longer rests on the case: it floats within it.
An automatic watch is not worn on the track: this is a horological dogma. The vibrations from a steering wheel, a racquet, aerobatic manoeuvres saturate a calibre within minutes — they misalign the pivots, fatigue the balance and ruin precision. B.R.M Chronographes rejected this dogma in 2014.
When an impact strikes the case, the energy is absorbed by the springs before reaching the movement. On the dial, the three front-facing shock absorbers remain visible: they are the hallmark of this innovation, and its visible proof.
System and models registered with the INPI.
Understanding the mechanism
You may also like








On the oscillating weight or the sapphire case-back.
Tracked shipment, in France and internationally.
In addition to the statutory warranty of conformity.