Configurator · Automatic three-hand · 44 mm

Custom golf watch: build your own GF6-44

The large case of the Golf collection: 44 mm machined from solid in Magny-en-Vexin, a self-winding ETA 2824-2 calibre and a movement suspended by the Shock Absorbers system, whose springs run through the dial. To design a golf watch here you go section by section: case, solid or skeleton dial, numeral colour, lacquer, springs, hands, crown, lugs, strap, buckle and engraving; the workshop then assembles it by hand.

From €3,640

B.R.M GF6-44 in black PVD steel, black dial and apple-green lacquer, a golf watch designed in the configurator

Touch the watch to take control.

Try it in one gesture

Change a part and the watch changes before your eyes. You then carry on in the configurator, with this very watch.

Case

Dial

Lacquer and springs

Strap

This composition €3,640

Continue in the configurator →
  • 13sections to design
  • 341options to choose from
  • 1 million+combinations
  • 3 yearswarranty, assembled by hand in Magny-en-Vexin

A million: the dial (4), numeral colour (11), springs (18), hands (21) and strap (118) alone already make over 1.9 million different watches.

The GF6-44 in figures

Type
Automatic three-hand
Diameter
44 mm
Lug width
22 × 19 mm
Movement
ETA 2824-2 calibre, self-winding; skeletonised by B.R.M with the skeleton dials
Frequency
28,800 vibrations per hour
Power reserve
38 hours
Functions
Hours, minutes, seconds; hacking seconds
Case
Machined from solid; 2 finishes: polished steel or black PVD steel
Crystal
Sapphire, front and back
Crown
Screw-down
Water resistance
100 metres
Movement ring
Mounted on shock absorbers (Shock Absorbers system)
Warranty
3 years, in addition to the legal guarantee of conformity
Customisation
341 options

What sets it apart

The large case of the Golf collection

44 mm against 38 for the GF7, an ETA 2824-2 calibre where the GF7 takes an ETA 2671: the GF6 is B.R.M's luxury golf watch for men, its case machined from solid in Magny-en-Vexin.

A suspended movement

The movement ring is mounted on shock absorbers: this is the Shock Absorbers system, introduced by B.R.M in 2014 and registered with the INPI. The movement is suspended in the case, and the springs that run through the dial take the colour of your choice.

Colour down to the detail

Numerals, case grooves, crown groove, springs, hands and, on skeleton versions, the automatic bridge: every touch of colour is chosen separately, for a golf watch that is yours from end to end.

What you design

Thirteen sections, each with its own colours and materials. The visual follows every choice.

  • Case 2
  • Dial 4
  • Numeral colour 11
  • Case grooves painting 38
  • Automatic bridge painting 19
  • Springs 54
  • Hands 63
  • Crown 2
  • Crown groove painting 18
  • Lugs 4
  • Strap 118
  • Buckle 2
  • Engraving

Frequently asked questions

Is the GF6-44 a chronograph?

No: it is an automatic three-hand watch. It is fitted with a self-winding ETA 2824-2 calibre, 28,800 vibrations per hour and a 38-hour power reserve, skeletonised by B.R.M when you choose a skeleton dial.

How big is the GF6-44?

The case is 44 mm in diameter, with a lug width of 22 × 19 mm: it is the large case of the Golf collection, the GF7 measuring 38 mm. It is water-resistant to 100 metres, with sapphire crystal front and back.

What can be customised on this golf watch?

The case (polished steel or black PVD steel), the solid or skeleton dial in white or black, the numeral colour, the case grooves, the springs, the automatic bridge on skeleton versions, the hands, the crown and its groove, the lugs, the strap (Alcantara, leather, rubber, Hypalon, Milanese mesh), the buckle and the engraving: twenty-four characters on the caseback or on the oscillating weight, except on skeleton versions.

How much does a custom GF6-44 cost?

It starts at €3,640. The price updates with every choice in the configurator, before you order.

Where is it made?

The case is machined from solid in Magny-en-Vexin, in the manufacture Bernard Richards founded in 1986, and the watch is then assembled by hand. It carries a three-year warranty, in addition to the legal guarantee of conformity.

Your GF6-44, piece by piece

Design it in a few minutes, in 3D, and save it to come back to later.