
V12
Reference V12-46-SA-AR
7 600 €Price incl. VAT
French manufacture, Magny-en-Vexin.
Insured and tracked delivery, France and international.
Engraving possible on the case back or on the oscillating weight. An engraved watch may neither be returned nor exchanged.
Three superimposed layers, stainless steel, titanium then stainless steel, compose the case of the V12-46-SA, a sandwich construction which gives this chronograph its distinctive profile. It receives the Shock Absorbers system conceived by the house in 2014: the movement, a Valjoux skeletonised in the workshop, is suspended on springs. On this version, springs and perforated hands are red, in vivid echo to the black dial.
A 46 mm case in stainless steel, titanium, stainless steel: the V12-46-SA Red is an automatic chronograph. It sits within the Racing universe. The colour scheme: red springs and red strap perforations. The dial is solid, in black. As for the hands: perforated red with tip coated in Superluminova®. It is driven by the Valjoux 7753 calibre, skeletonised by hand in the workshop: 27 jewels, 28,800 vibrations per hour and a 46-hour power reserve. The chronograph counts the seconds at the centre and totals up to 30 minutes and 12 hours on its sub-dials. The movement rests on the Shock Absorbers system, developed by B.R.M in 2014: suspended on springs, it has no rigid contact with the case middle. Also worth noting: water resistance to 100 metres, a weight of 110 grams, sapphire crystal front and back, a screw-down crown and a date display.
The V12-46-SA sets the chronograph on the Shock Absorbers system. To reach 46 mm while keeping the weight down, the manufacture layers stainless steel, titanium and stainless steel; six shock absorbers, three of them with progressive-rate springs, carry a Valjoux calibre skeletonised by hand in the workshop, and the springs stay visible, matched to the hands.
It is assembled by hand at the workbench, inspected and then numbered in Magny-en-Vexin, where Bernard Richards founded his manufacture in 1986 before launching the B.R.M Chronographes brand there in 2003 with the GP-44. Made to order, it takes 6 to 8 weeks; it carries a 3-year warranty, 6 with the extension, and its servicing and repairs are carried out at the manufacture.
The technology equipping this watch
Six helical steel springs — three on the front face, three on the rear face — encase the movement and mechanically isolate it from the case. The calibre no longer rests on the case: it floats within it.
An automatic watch is not worn on the track: this is a horological dogma. The vibrations from a steering wheel, a racquet, aerobatic manoeuvres saturate a calibre within minutes — they misalign the pivots, fatigue the balance and ruin precision. B.R.M Chronographes rejected this dogma in 2014.
When an impact strikes the case, the energy is absorbed by the springs before reaching the movement. On the dial, the three front-facing shock absorbers remain visible: they are the hallmark of this innovation, and its visible proof.
System and models registered with the INPI.
Understanding the mechanism
You may also like


















On the oscillating weight or the sapphire case-back.
Tracked shipment, in France and internationally.
In addition to the statutory warranty of conformity.