Configurator · Automatic chronograph · 46 mm

Custom skeleton chronograph: build your own V12-46-SA

A custom skeleton chronograph, shock-resistant and built for racing: a 46 mm case layering steel, titanium and steel, machined from solid in Magny-en-Vexin, a Valjoux 7753 calibre skeletonised by hand in the workshop, set on the Shock Absorbers system whose visible springs take the colour of the hands. In the configurator you choose the case, a full or skeleton dial, the hands, springs, crown, strap and engraving; the workshop assembles it by hand.

From €7,470

B.R.M V12-46-SA in 3D, black dial, red springs and hands: a skeleton chronograph designed in the configurator

Touch the watch to take control.

Try it in one gesture

Change a part and the watch changes before your eyes. You then carry on in the configurator, with this very watch.

Case

Dial

Springs and hands

Strap

This composition €7,470

Continue in the configurator →
  • 16sections to design
  • 194options to choose from
  • 80,000+combinations
  • 3 yearswarranty, assembled by hand in Magny-en-Vexin

Over 80,000: the case (2 finishes), dial (4), crown (5), spring colour (18) and strap (121) alone already make 87,120 different watches.

The V12-46-SA in figures

Type
Automatic chronograph with date
Diameter
46 mm
Lug width
22 × 19 mm
Movement
Valjoux 7753 calibre skeletonised by B.R.M, self-winding, 27 jewels
Frequency
28,800 vibrations per hour
Power reserve
46 hours
Functions
60-second chronograph, 30-minute and 12-hour counters, date
Case
Steel, titanium, steel, machined from solid; 2 finishes: steel, or steel and black PVD
Weight
110 grams
Crystal
Sapphire, front and back
Crown
Screw-down
Water resistance
100 metres
Movement ring
Mounted on shock absorbers, Shock Absorbers system
Warranty
3 years, in addition to the legal guarantee of conformity
Customisation
194 options

What sets it apart

A calibre skeletonised by hand

The manufacture skeletonises the Valjoux 7753 calibre by hand in Magny-en-Vexin, in the workshop Bernard Richards founded in 1986. In the skeleton version the dial steps aside to reveal the automatic bridge, painted in the colour you choose.

A suspended movement

Instead of anchoring the calibre in the case, the Shock Absorbers system, introduced by B.R.M in 2014 and registered with the INPI, lets it float on springs. Visible on the dial, they take the colour of the hands: a shock-resistant chronograph made to take the knocks.

46 mm, weight kept in check

Steel, titanium, steel: layering the materials keeps 46 mm down to 110 grams. Screw-down crown, shock-resistant balance, sapphire crystal front and back, water-resistant to 100 metres.

What you design

Sixteen sections, each with its own colours and materials. The visual follows every choice.

  • Case 2
  • Case back 2
  • Dial 4
  • Automatic bridge painting 19
  • Hands 87
  • Crown 5
  • Crown groove painting 18
  • Lugs 3
  • Springs painting 54
  • Rehaut painting 19
  • Strap 121
  • Rubber strap buckle 3
  • Leather strap buckle 3
  • Fabric strap buckle 3
  • Crown marking 4
  • Engraving

Frequently asked questions

Is the V12-46-SA a chronograph?

Yes. It is a self-winding, shock-resistant chronograph fitted with a Valjoux 7753 calibre skeletonised by B.R.M: 60-second chronograph, 30-minute and 12-hour counters, date, 28,800 vibrations per hour and a 46-hour power reserve. The movement rests on the Shock Absorbers system.

How big is the V12-46-SA?

The case is 46 mm in diameter, with a lug width of 22 × 19 mm and a weight of 110 grams. It is water-resistant to 100 metres, with sapphire crystal front and back.

What can be customised?

The case (steel-titanium-steel, or with black PVD), caseback, dial (black or white, full or skeleton), automatic bridge, hands (hours, minutes, chronograph, counters), spring paintwork, crown and its groove, lugs, flange, strap, buckle, crown marking and engraving: twenty-four characters on the caseback or the oscillating weight, except on skeleton versions.

How much does a custom V12-46-SA cost?

It starts at €7,470. The price updates with every choice in the configurator, before you order.

Where is it made?

The case is machined from solid and the calibre skeletonised by hand in Magny-en-Vexin, in the manufacture Bernard Richards founded in 1986, and the watch is then assembled by hand. It carries a three-year warranty, in addition to the legal guarantee of conformity.

Your V12-46-SA, piece by piece

Design it in a few minutes, in 3D, and save it to come back to later.