
V6
Reference V6-44-SA-SQ-AB
5 720 € Prix TTC
French manufacture, Magny-en-Vexin.
Insured and tracked delivery, France and international.
Engraving possible on the case back or on the oscillating weight. An engraved watch may neither be returned nor exchanged.
Case in stainless steel coated with black PVD, skeletonised dial: the V6-44-SA-N reveals the mechanism it suspends. Its ETA 2824-2 base calibre, skeletonised in the workshop, rests on the springs of the Shock Absorbers system, introduced by the house in 2014. Here, springs and perforated hands are white, in sharp contrast with the black of the case and the metallic transfers. A watch conceived for motor sports enthusiasts.
A 44 mm case in black PVD stainless steel: the V6-44-SA-N White Skeleton is a three-hand automatic watch. It belongs to the house's Racing universe. Its colours: white springs and white strap perforations. Its skeletonised dial comes in black. As for the hands: perforated white with tip coated in Superluminova®. It is driven by the ETA 2824-2 calibre, skeletonised by hand in the workshop: 24 jewels, 28,800 vibrations per hour and a 38-hour power reserve. The movement rests on the Shock Absorbers system, developed by B.R.M in 2014: suspended on springs, it has no rigid contact with the case middle. Add to that water resistance to 100 metres, a weight of 79 grams, sapphire crystal front and back and a screw-down crown.
SA stands for Shock Absorbers. Introduced in 2014, the V6-44-SA is the first B.R.M watch with a suspended movement: six helical steel springs, three on the dial side and three on the caseback side, set at 120°, hold it with no rigid contact with the case middle. The springs stay visible and change colour from one reference to another; the system is registered with the INPI.
The case is machined from the solid and the watch assembled by hand in Magny-en-Vexin (Val-d'Oise, France) by Bernard Richards Manufacture, an Entreprise du Patrimoine Vivant. Allow 6 to 8 weeks for it to be made to order. The watch is guaranteed for three years, six with the extension, and servicing and repairs are entrusted to the manufacture and nowhere else.
The technology equipping this watch
Six helical steel springs — three on the front face, three on the rear face — encase the movement and mechanically isolate it from the case. The calibre no longer rests on the case: it floats within it.
An automatic watch is not worn on the track: this is a horological dogma. The vibrations from a steering wheel, a racquet, aerobatic manoeuvres saturate a calibre within minutes — they misalign the pivots, fatigue the balance and ruin precision. B.R.M Chronographes rejected this dogma in 2014.
When an impact strikes the case, the energy is absorbed by the springs before reaching the movement. On the dial, the three front-facing shock absorbers remain visible: they are the hallmark of this innovation, and its visible proof.
System and models registered with the INPI.
Understanding the mechanism
You may also like








On the oscillating weight or the sapphire case-back.
Tracked shipment, in France and internationally.
In addition to the statutory warranty of conformity.