Configurator · Automatic three-hand · 44 mm
Custom motorcycle watch: build your own V6-44-SA
B.R.M's shock-absorber watch: a self-winding calibre suspended by the Shock Absorbers system, whose visible springs cross the dial, in a 44 mm case machined from solid in Magny-en-Vexin. Several V6-44-SAs have joined the house's motorcycle selection. In the configurator you choose the case, a full or skeleton dial, the colour of the springs and hands, the crown, strap and engraving; the workshop assembles it by hand.
From €3,820
Touch the watch to take control.
Try it in one gesture
Change a part and the watch changes before your eyes. You then carry on in the configurator, with this very watch.
Case
Dial
Springs and hands
Strap
This composition €3,820
Continue in the configurator →Compositions to start from
Touch a watch: it appears in 3D above, then carry on in the configurator.
ClassicSteel and blackbrushed steel, black dial, white springs and hands, black leather€3,820
ClassicGrey skeletonbrushed steel, skeleton movement, grey springs, grey Alcantara€5,270
ClassicPolished steel and rose goldpolished steel, black dial with 5N indexes, rose-gold hands, Milanese mesh€4,170
ClassicTitanium and pearl whitetitanium, pearl-white dial, grey springs, grey perforated leather€5,210
ColourfulSteel and azure bluepolished steel, azure-blue dial, white springs and hands, blue Milanese mesh€4,950
ColourfulBronze and chocolatebronze, brown dial, beige springs and hands, brown leather€3,820
ColourfulRacing greenbrushed steel, black dial, racing-green springs, hands and grooves, green Alcantara€4,320
ColourfulSky-blue ceramicbronze and sky-blue ceramic, pearl-white dial, sky-blue accents€5,850
SportyBlack and yellow skeletonblack PVD, skeleton movement, yellow springs, hands and bridge, yellow rubber€6,860
SportyRed Cercolorred ceramic titanium, carbon dial, grey springs, red hands and rubber€5,650
SportyOrange Makrolonpolished Makrolon, skeleton movement, orange accents, orange rubber€6,770
SportyWhite checkerboardwhite-checkerboard titanium, carbon skeleton, white springs, black Hypalon with white holes€7,230
- 20sections to design
- 284options to choose from
- 1 million+combinations
- 3 yearswarranty, assembled by hand in Magny-en-Vexin
A million: the case (19 finishes), dial (14), crown (9), lugs (4) and strap (118) alone already make over 1.1 million different watches.
The V6-44-SA in figures
- Type
- Automatic three-hand, calibre on Shock Absorbers
- Diameter
- 44 mm
- Lug width
- 22 × 19 mm
- Movement
- Self-winding calibre; depending on the version, ETA 2824-2 full or skeletonised by B.R.M, or skeleton SP024
- Frequency
- 28,800 vibrations per hour
- Power reserve
- 38 hours
- Functions
- Hours, minutes, seconds with hacking seconds; date depending on the version
- Case
- Machined from solid; 19 finishes: brushed or polished steel, black or brown PVD, bronze, Makrolon, titanium, checkerboard, ceramic
- Crystal
- Sapphire, front and back
- Crown
- Screw-down, with crown guard
- Water resistance
- 100 metres
- Movement ring
- Mounted on shock absorbers (Shock Absorbers system)
- Warranty
- 3 years, in addition to the legal guarantee of conformity
- Customisation
- 284 options
What sets it apart
The calibre on its shock absorbers
Rather than anchoring the calibre in the case, B.R.M lets it float: the Shock Absorbers system, introduced in 2014 and registered with the INPI, isolates it from shocks and vibrations. The front springs cross the dial, and you choose their colour in the configurator.
A custom skeleton watch
Skeletonising and bridge painting are done by hand in Magny-en-Vexin. Full, carbon, car-paint or skeleton dial, coloured winding bridge: you decide how much of the movement the watch reveals.
From the paddock to the motorcycle
Born in the Racing world, the V6-44-SA has given its Cercolor, ColorDrive and Makrolon versions to the house's motorcycle selection. A men's sports watch, water-resistant to 100 metres, with a pin buckle machined in nine steel parts.
What you design
Twenty sections, each with its own colours and materials. The visual follows every choice.
- Case 19
- Case grooves painting 38
- Case back 2
- Dial 14
- Automatic bridge painting 19
- Hands 63
- Crown 9
- Crown groove painting 18
- Colour of horizontal grooves on crown 18
- Crown protector 3
- Lugs 4
- Springs painting 54
- Rehaut painting 19
- Strap 118
- Buckles for fabric and alcantara strap 3
- Buckles for leather strap 3
- Buckles for rubber strap 3
- Logo at 6 o'clock 2
- Crown marking 4
- Engraving
Frequently asked questions
Is the V6-44-SA a chronograph?
No. It is a self-winding three-hand watch: hours, minutes, seconds with hacking seconds, 28,800 vibrations per hour and a 38-hour power reserve. What sets it apart is the Shock Absorbers system, which suspends the calibre on shock absorbers.
How big is the V6-44-SA?
The case is 44 mm in diameter, with a lug width of 22 × 19 mm. It is water-resistant to 100 metres, with sapphire crystal front and back.
What can be customised?
The case (19 finishes, from steel to bronze, Makrolon, titanium and ceramic), the lacquered grooves, a full or skeleton dial, the winding bridge, the hands, the colour of the springs, the crown, crown guard, lugs, strap, buckle and engraving: twenty-four characters on the caseback or on the oscillating weight.
How much does a custom V6-44-SA cost?
It starts at €3,820. The price updates with every choice in the configurator, before you order.
Where is it made?
The case is machined from solid in Magny-en-Vexin, in the manufacture Bernard Richards founded in 1986; skeletonising and bridge painting are done there by hand, and the watch is then assembled by hand. It carries a three-year warranty, in addition to the legal guarantee of conformity.
Your V6-44-SA, piece by piece
Design it in a few minutes, in 3D, and save it to come back to later.




