Motorcycling
What to expect from a watch for motorcycling, and why B.R.M suspends its calibres on springs.
A motorcycle watch must be read at a glance, not fear rain and withstand what the motorcycle transmits to the wrist: continuous vibrations, through the handlebars, for hours. This is a delicate point for a mechanical watch. B.R.M Chronographes, a manufacture founded in 1986 in Magny-en-Vexin, addresses this through the very construction of its cases: on the SA models, the automatic calibre is suspended on six shock absorber springs.
A biker's watch responds to two expectations. The first relates to style: a watch that speaks of mechanics, engine and speed, and that one wants to wear with a jacket. The second is practical: a watch that is kept on the wrist whilst riding, without sparing it, and that can be read at a glance when stopped. A good watch for motorcycling responds to both.
On a motorcycle, the engine and the road transmit continuous vibrations to the handlebars, which the hands and wrists receive throughout the journey. A mechanical movement is sensitive to this: repeated shocks and vibrations can misalign the pivots, fatigue the balance wheel and impair precision. This is why it is often recommended to remove a mechanical watch before an activity that subjects it to shaking.
Most often, a watch's calibre is screwed directly to the middle case: every vibration reaches it as such. At B.R.M, this is not the case on any model.
Introduced by B.R.M in 2014 with the V6-44-SA, the Shock Absorbers system allows the movement to float rather than anchoring it. Six helical steel springs, three on the front face and three on the rear face, spaced at 120°, enclose the calibre and isolate it from the case middle: the energy from an impact is absorbed before reaching the movement, regardless of its direction. The system and the models that bear it are registered with the INPI.
The three front-facing springs traverse the dial at 12 o'clock, 4 o'clock and 8 o'clock, in a colour matched to the model: the suspension is visible. The complete system equips the V6-44-SA and V12-46-SA, as well as the GF6 and GF7 from the Golf collection; on all other B.R.M watches, the casing ring rests on at least three shock absorbers on the case back. The manufacture states that more than 40,000 equipped watches are in circulation. The principle in detail: the Shock Absorbers system.
On a motorcycle, one glances at one's watch for only a fraction of a second. B.R.M watches have perforated hands whose tips are coated with Superluminova®, contrasting dials and, on chronographs, counters that read like the dials of a dashboard. Most watches in the Motorcycle selection measure 44 mm: a large dial, for 79 g on a V6-44-SA.
The Moto selection brings together watches from the Racing universe inspired by two-wheelers, from 4,720 € to 8,060 €. A few reference points:
Motorcycling has its place in the house's journal. B.R.M announced its partnership with the Tecmas Racing Team, a French motorcycle racing team founded in 1990 (October 2025), then with GMT94, a French team three-time Endurance world champion (June 2026). B.R.M watches are also presented at a dealer dedicated to motorcycling, Esprit Moto, in the Basque Country: see points of sale.
For a watch in the colours of one's motorcycle, the configurator composes the V6-44-SA or the V8-44 piece by piece: see bespoke watch. For the car, also read motoring watch.
Yes, if the movement is protected from vibrations. On the B.R.M SA models, the calibre is suspended on six shock-absorbing springs; on all others, the casing ring rests on at least three shock absorbers.
A legible watch, water-resistant, with an appropriate strap, and whose movement withstands vibrations. The B.R.M Moto selection ranges from 4,720 € to 8,060 €, with V6-44-SA watches with suspended movement and Valjoux 7753 chronographs.
Yes: the watches in the Moto selection are water-resistant to 100 metres, with sapphire crystal top and bottom and a screw-down crown.
Rubber or Hypalon, which withstand rain and perspiration; leather and Alcantara® are kept for dry days. B.R.M straps are interchangeable, from 230 €.
No, as long as it is worn: the oscillating weight winds it with wrist movements. When set down, it stops at the end of its power reserve, 38 hours on the ETA 2824-2 and 46 hours on the Valjoux 7753; a few turns of the crown restart it.
From 4 720 € to 8 060 € for the Moto selection, prices including VAT. Each watch is made to order in 6 to 8 weeks and guaranteed for 3 years.