Motorsport

Automotive watch: the chronograph for racing enthusiasts

What makes a true motor sport watch, and how the B.R.M manufacture designs its own like engine components.

An automotive watch, or motor racing watch, borrows from racing its instrument, the chronograph, its dashboard legibility and its materials. At B.R.M Chronographes, a manufacture founded in 1986 in Magny-en-Vexin, the car is not decoration applied to the dial: the case of the V12 is machined in the shape of a piston, that of the DDF series reproduces a brake disc and its caliper, and the movement of the SA models is suspended on shock absorbers. All the house's watches are mechanical, self-winding.

Motor car watch, racing watch: why the chronograph

On a racing circuit, everything is measured: the lap, the pit stop, the gap to the car ahead. The chronograph is made for this: a watch that, in addition to telling the time, starts, stops and resets a time measurement at the press of a button. This is what has connected it, for decades, to drivers, timekeepers and motor racing enthusiasts.

A mechanical chronograph is recognisable by its two pushers, on either side of the crown, and by its counters. On B.R.M chronographs, the pusher at 2 o'clock starts and stops the measurement, the one at 4 o'clock resets it to zero; the central seconds hand counts the seconds, two counters totalise up to 30 minutes and 12 hours. To go further: how a mechanical chronograph works.

What makes a true motor sport watch

  • Legible as a dashboard. A contrasting dial, forthright hands, indices read without searching. B.R.M hands are perforated, their tips coated with Superluminova® for reading in darkness.
  • Controls one finds without looking. On the V12-44, pushers and crown are oversized; the crown is screwed down and protected by a crown guard.
  • A mechanism that withstands. Steering wheel, vibrations, braking: a watch worn whilst driving receives shocks and vibrations that the movement must withstand.
  • Materials from racing. Titanium, carbon, Makrolon®, Alcantara®: the materials of the racing universe are borrowed from the motor car.
  • Made to be worn. Sapphire crystal and 100 metres water resistance on all watches mentioned here.

The tachymetric scale: reading speed at the wrist

The tachymeter is a graduated scale on the periphery of the dial or beneath the crystal. One starts the chronograph at the passage of a marker, stops it one kilometre further on: the chronograph seconds hand then indicates the average speed on the scale. One kilometre covered in 30 seconds corresponds to 120 km/h, in 20 seconds to 180 km/h.

At B.R.M, the R11-41 Bronze features a black dial with three counters and a tachymetre printed on the sapphire crystal (6 790 €); the V12-44 Chocolate has its scale printed beneath the crystal (7 240 €). In the configurator, the V12-44 offers five tachymetres to choose from.

The B.R.M approach: a watch designed as a mechanical component

B.R.M does not reproduce a car on a dial: the house designs the case like an engine or braking component, then machines it from the solid in Magny-en-Vexin and assembles it by hand.

  • The piston: V12 and V8. The V12-44 has a 44 mm steel case machined in the shape of a piston, on a Valjoux 7753 chronograph calibre; it was born at the dawn of the brand. The V12-44 White is €6,020. The V8-44 shares the calibre, diameter and weight, with a bevelled case and, most often, a carbon dial: the V8-44 Classic is €6,550.
  • The brake disc: DDF6 and DDF12. A round 46 mm titanium case, a black PVD steel bezel in the form of a racing brake disc and a four-piston calliper; on the DDF6, the calliper serves as a crown guard. The DDF6-46 Red, three-hander on ETA 2824-2 calibre, weighs 74 g and costs €3,920; the DDF12-46 Red, Valjoux 7753 chronograph, €7,060.
  • The lightness of a racing car. The MK-44, a skeletonised chronograph with a Makrolon® case, weighs 47 g; its lugs, crown and screws are in titanium.

A suspended movement, like a car on its shock absorbers

On most watches, the movement is screwed to the case middle: every vibration reaches it directly. In 2014, B.R.M introduced the Shock Absorbers system: six helical steel springs, three at the front and three at the rear, spaced 120° apart, suspend the calibre without rigid contact with the case. The three front springs pass through the dial: they are visible at 12 o'clock, 4 o'clock and 8 o'clock.

The complete system equips the V6-44-SA, three-handers from €3,950 with the V6-44-SA Red, and the V12-46-SA, skeletonised chronographs from €7,600 with the V12-46-SA Red. On all other watches from the house, the movement ring rests on at least three shock absorbers. The principle in detail: the Shock Absorbers system.

Art Car: the racing car becomes a canvas

The Art Car collection revives the tradition of racing cars entrusted to artists. These are models from the catalogue reinterpreted in colour: lacquer is applied randomly to the chapter ring, crown and lugs, and the dials are printed at the manufacture. All are announced as limited editions. The V6-44-SA Art Car is 4,700 €, the V12-44 Titanium Art Car 8,940 €.

Racing driver's watch: the maison's partners

B.R.M watches are worn by drivers, teams and organisers. Among the partnerships announced in the house journal:

  • Raul Marchisio, former Italian rally driver nicknamed 'the Professor', ambassador of the house (July 2025); the V12-44-Raul Marchisio is priced at 7,840 €.
  • Michel Vaillant: the collaboration with the comic series has expanded with the B.R.M x Leader (November 2025); the V6-44 Vaillante is priced at 4 200 €.
  • Whiskers Motorsport, garage and team based in Lohéac (March 2026).
  • PH Sport, international rallying structure founded in 1990 (March 2026); the DDF12-46-PH SPORT is priced at 9,400 €.
  • The Championnat de France de Drift FFSA, of which B.R.M is official partner (May 2026).
  • Driver One, house of motoring experiences (June 2026).
  • L'Uzès DreamCar Festival, the fifth edition of which will take place from 21 to 23 May 2027 (announcement of 18 November 2026).

The watches signed with them: Partners. All the announcements: the journal.

Which automotive watch to choose?

  • For the engine: the V12 in piston form, or the V8 with bevelled case.
  • For braking: la DDF6 trois aiguilles ou le chronographe DDF12.
  • For the track, with a suspended movement: the V6-SA or the V12-SA.
  • For colour: an Art Car in limited series.

Each watch is made to order, within 6 to 8 weeks, and guaranteed for 3 years (6 years with the extension). To compose your own element by element: the configurator, or the bespoke watch. All racing watches: the Racing universe. For a gift: giving a watch to a motor racing enthusiast.

Frequently asked questions

A watch inspired by motor racing: most often a chronograph, legible like a dashboard, with materials from racing. At B.R.M, the case itself reproduces a mechanical part: a piston for the V12, a brake disc for the DDF series.

A mechanical chronograph, for timing a lap or a pit stop. At B.R.M: the piston-shaped V12-44 (from 6,020 €), the V8-44 (6,550 €), the DDF12-46 with brake disc (7,060 €) or the V12-46-SA with suspended movement (7,600 €), all on a Valjoux 7753 calibre.

To read an average speed: one times a kilometre, and the chronograph seconds hand indicates the speed on the scale. A kilometre in 30 seconds corresponds to 120 km/h.

On B.R.M SA models, the movement is suspended on six shock-absorbing springs (Shock Absorbers system, introduced in 2014). On all other models, the movement ring rests on at least three shock absorbers: the movement is never screwed directly to the case middle.

The Racing universe ranges from 3 290 € to 44 000 €. The DDF6-46 starts at 3 920 €, the V6-44-SA at 3 950 €, the V12-44 at 6 020 €. Prices in euros including VAT, delivery included.

In Magny-en-Vexin, in Val-d'Oise: cases machined from solid, skeletonising and hand assembly in the workshop. Most movements are Swiss base automatic calibres (ETA, Valjoux).