Configurator · Automatic chronograph · 46 mm
Custom titanium chronograph: build your own DDF12-46
B.R.M's brake-disc chronograph: a round 46 mm titanium case machined from solid, a black PVD steel bezel shaped like a competition brake disc, gripped by a four-piston caliper in 316L steel that carries the crown, and a Valjoux 7753 calibre. In the configurator you choose the case, dial, hands, caliper colour, crown, lugs, strap and engraving; the workshop assembles it by hand.
From €6,490
Touch the watch to take control.
Try it in one gesture
Change a part and the watch changes before your eyes. You then carry on in the configurator, with this very watch.
Case
Dial
Hands and caliper
Strap
This composition €6,490
Continue in the configurator →Compositions to start from
Touch a watch: it appears in 3D above, then carry on in the configurator.
ClassicTitanium and blacktitanium, black dial with applied indexes, black caliper and leather€6,790
ClassicTitanium and whitetitanium, polished lugs, white dial, grey caliper, brown leather€6,790
ClassicGrey and rose goldtitanium with grey disc, grey dial with 5N indexes, grey leather€6,790
ClassicPerlagetitanium, black PVD lugs, perlage dial, black perforated leather€7,360
ColourfulMidnight bluetitanium, midnight-blue dial, dark blue caliper and Alcantara€7,090
ColourfulRacing greentitanium, racing-green perlage dial, green caliper and leather€6,790
ColourfulChocolatetitanium, brown dial, beige hands, brown caliper and leather€6,790
ColourfulSky-blue skeletontitanium, skeleton movement, sky-blue hands, caliper and perforated leather€13,470
SportyRed carbontitanium, carbon dial, red hands and caliper, black Hypalon with red perforations€7,380
SportySun yellowtitanium and black PVD, sun-yellow dial, yellow caliper and rubber€8,350
SportyWhite stripe and orangeblack PVD with grey disc, white-stripe dial, orange hands, caliper and crown groove€8,860
SportyApple greentitanium, black PVD lugs, apple-green hands, caliper and perforated leather€7,060
- 15sections to design
- 164options to choose from
- 195,000+combinations
- 3 yearswarranty, assembled by hand in Magny-en-Vexin
Over 195,000: the case (4 finishes), dial (28), crown (5), lugs (3) and strap (117) alone already make 196,560 different watches, before the hands and caliper colour.
The DDF12-46 in figures
- Type
- Automatic chronograph
- Diameter
- 46 mm
- Lug width
- 22 × 19 mm
- Movement
- Valjoux 7753 calibre, self-winding, 27 jewels; skeletonised by B.R.M depending on version
- Frequency
- 28,800 vibrations per hour
- Power reserve
- 46 hours
- Functions
- 60-second chronograph, 30-minute and 12-hour counters; date depending on version
- Case
- Titanium machined from solid, black PVD steel brake-disc bezel; 4 finishes: titanium, titanium with grey disc, black PVD titanium with grey disc, titanium and black PVD
- Crystal
- Sapphire, front and back
- Crown
- Screw-down, carried by the four-piston caliper
- Water resistance
- 100 metres
- Movement ring
- Mounted on shock absorbers
- Warranty
- 3 years, in addition to the legal guarantee of conformity
- Customisation
- 164 options
What sets it apart
The brake-disc chronograph
The same 46 mm titanium case and brake-disc bezel as the DDF6, but with a Valjoux 7753 calibre: 60-second chronograph, 30-minute and 12-hour counters, 46-hour power reserve.
A titanium case
Inspired by the brake discs of racing cars, the DDF12 is designed and machined in the Magny-en-Vexin workshops; its titanium case is a machining challenge in itself. The watch weighs 95 grams.
A motor-racing watch
A four-piston caliper in 316L steel, lightened lugs, dials in bodywork colours, a carbon dial or a movement skeletonised by B.R.M: every part is machined, and the watch is then assembled by hand.
What you design
Fifteen sections, each with its own colours and materials. The visual follows every choice.
- Case 4
- Dial 28
- Automatic bridge painting 19
- Hands 87
- Crown 5
- Crown groove painting 18
- Crown protector 2
- Crown protector painting 18
- Lugs 3
- Strap 117
- Rubber strap buckle 3
- Leather strap buckle 3
- Hypalon strap buckle 3
- Crown marking 4
- Engraving
Frequently asked questions
Is the DDF12-46 a chronograph?
Yes. It is fitted with a self-winding Valjoux 7753 calibre: 60-second chronograph, 30-minute and 12-hour counters, 28,800 vibrations per hour and a 46-hour power reserve, with a date depending on version. The three-hand version is the DDF6-46.
How big is the DDF12-46?
The titanium case is 46 mm in diameter, with a lug width of 22 × 19 mm, and weighs 95 grams. It is water-resistant to 100 metres, with sapphire crystal front and back.
What can be customised?
The case (4 titanium finishes, black or grey disc), the dial (28, from carbon to bodywork colours and skeleton), the hands, the crown and its groove paint, the crown guard and the caliper paint, lugs, strap, buckle, crown marking and engraving: twenty-four characters on the caseback or on the oscillating weight, except on a skeleton movement.
How much does a custom DDF12-46 cost?
It starts at €6,490. The price updates with every choice in the configurator, before you order.
Where is it made?
It is designed and machined in the Magny-en-Vexin workshops, where B.R.M has machined its cases from solid since 1986, in the manufacture Bernard Richards founded, and then assembled by hand. It carries a three-year warranty, in addition to the legal guarantee of conformity.
Your DDF12-46, piece by piece
Design it in a few minutes, in 3D, and save it to come back to later.




