Configurator · Automatic chronograph · 44 mm
Custom racing chronograph: build your own V12-44
B.R.M's automatic chronograph, born in the brand's earliest days and conceived as a racing piece: a 44 mm case machined from solid in Magny-en-Vexin, a Valjoux 7753 calibre, oversized pushers and crown. In the configurator you choose the case, dial, hands, crown, strap and engraving; the workshop assembles it by hand.
From €6,020
Touch the watch to take control.
Try it in one gesture
Change a part and the watch changes before your eyes. You then carry on in the configurator, with this very watch.
Case
Dial
Hands
Strap
This composition €6,020
Continue in the configurator →Compositions to start from
Touch a watch: it appears in 3D above, then carry on in the configurator.
ClassicSteel and blackbrushed steel, black dial with applied indexes, black leather€6,320
ClassicPolished steel and whitepolished steel, white dial, brown leather€6,680
ClassicTitanium and greytitanium, grey dial, grey leather€7,230
ClassicPolished steel, grey and rose goldpolished steel, grey dial with 5N indexes, black leather€6,680
ColourfulSteel and bluepolished steel, sunray blue dial, blue accents€7,330
ColourfulBronze and British greenbronze, racing-green perlage dial, green Alcantara€7,200
ColourfulChocolatebrown PVD, brown dial, brown leather, beige hands€7,510
ColourfulSky-blue ceramicbronze and sky-blue ceramic, white dial€8,500
SportyBlack and yellowblack PVD, yellow hands and grooves, yellow rubber€9,030
SportyRed carbonBN case, carbon dial, red tachymeter and hands€9,110
SportyWhite and racing redbrushed steel, white dial, red grooves and perforated leather€7,200
SportyCheckerboard skeletoncheckerboard titanium, skeleton movement, black Alcantara€13,990
- 18sections to design
- 265options to choose from
- 1 million+combinations
- 3 yearswarranty, assembled by hand in Magny-en-Vexin
A million: the case (16 finishes), dial (27), crown (6), lugs (6) and strap (119) alone already make over 1.8 million different watches.
The V12-44 in figures
- Type
- Automatic chronograph with date
- Diameter
- 44 mm
- Lug width
- 22 × 19 mm
- Movement
- Valjoux 7753 calibre, self-winding, 27 jewels
- Frequency
- 28,800 vibrations per hour
- Power reserve
- 46 hours
- Functions
- 60-second chronograph, 30-minute and 12-hour counters, date
- Case
- Machined from solid; 16 finishes: brushed or polished steel, black, blue or brown PVD, bronze, titanium, checkerboard, ceramic
- Crystal
- Sapphire, front and back
- Crown
- Screw-down, with crown guard
- Water resistance
- 100 metres
- Movement ring
- Mounted on shock absorbers
- Warranty
- 3 years, in addition to the legal guarantee of conformity
- Customisation
- 265 options
What sets it apart
The chronograph of the early days
The V12 was born in the brand's earliest days and has never left Magny-en-Vexin, where B.R.M has machined its cases from solid since 1986. Together with the V6, it remains one of the house's best sellers.
The look of a racing car
Oversized pushers and crown, crown guard, lightened hands, a pin buckle machined in nine parts: every element is finished by hand before casing.
A true mechanical chronograph
The Valjoux 7753 calibre times up to 12 hours: chronograph seconds hand, 30-minute counter, 12-hour counter, date, and a 46-hour power reserve.
What you design
Eighteen sections, each with its own colours and materials. The visual follows every choice.
- Case 16
- Tachymeter 5
- Case grooves painting 57
- Case back 2
- Dial 27
- Automatic bridge painting 19
- Hands 87
- Crown 6
- Crown groove painting 18
- Crown protector 3
- Lugs 6
- Rehaut painting 38
- Strap 119
- Leather strap buckle 3
- Rubber strap buckle 3
- Fabric and alcantara strap buckle 3
- Crown marking 4
- Engraving
Frequently asked questions
Is the V12-44 a chronograph?
Yes. It is fitted with a self-winding Valjoux 7753 calibre: 60-second chronograph, 30-minute and 12-hour counters, date, 28,800 vibrations per hour and a 46-hour power reserve.
How big is the V12-44?
The case is 44 mm in diameter, with a lug width of 22 × 19 mm. It is water-resistant to 100 metres, with sapphire crystal front and back.
What can be customised?
The case (16 finishes, from steel to titanium, bronze and ceramic), the tachymeter, the groove paintwork, the dial, hands, crown, crown guard, lugs, strap, buckle and engraving: twenty-four characters on the caseback or on the oscillating weight.
How much does a custom V12-44 cost?
It starts at €6,020. The price updates with every choice in the configurator, before you order.
Where is it made?
The case is machined from solid in Magny-en-Vexin, in the manufacture Bernard Richards founded in 1986, and the watch is then assembled by hand. It carries a three-year warranty, in addition to the legal guarantee of conformity.
Your V12-44, piece by piece
Design it in a few minutes, in 3D, and save it to come back to later.




