Configurator · Automatic three-hand · 46 mm

Brake-disc watch: build your own DDF6-46

B.R.M's brake-disc watch: a round 46 mm titanium case machined from solid, and two micro-drilled black PVD steel bezels gripped by a four-piston caliper that doubles as crown guard. A custom titanium racing watch, automatic three-hand, weighing 74 grams. In the configurator you choose the case, dial, hands, caliper colour, crown, strap and engraving; the workshop assembles it by hand.

From €3,790

B.R.M DDF6-46 in titanium with black dial, red hands and caliper, a brake-disc watch designed in the configurator, in 3D

Touch the watch to take control.

Try it in one gesture

Change a part and the watch changes before your eyes. You then carry on in the configurator, with this very watch.

Case

Dial

Hands and caliper

Strap

This composition €3,790

Continue in the configurator →
  • 16sections to design
  • 156options to choose from
  • 45,000+combinations
  • 3 yearswarranty, assembled by hand in Magny-en-Vexin

Over 45,000: the case (4 finishes), dial (10), crown (5), lugs (2) and strap (113) alone already make 45,200 different watches, before the hands and caliper colour.

The DDF6-46 in figures

Type
Automatic three-hand
Diameter
46 mm
Lug width
22 × 19 mm
Movement
ETA 2824-2 calibre, self-winding; skeletonised by B.R.M on skeleton versions
Frequency
28,800 vibrations per hour
Power reserve
38 hours
Functions
Hours, minutes, seconds; date on full-dial versions
Case
Titanium machined from solid, black PVD steel brake-disc bezels; 4 finishes: titanium, titanium with grey disc, black PVD titanium with grey disc, titanium and black PVD
Crystal
Sapphire, front and back
Crown
Screw-down, under the four-piston caliper that serves as crown guard
Water resistance
100 metres
Movement ring
Mounted on shock absorbers
Warranty
3 years, in addition to the legal guarantee of conformity
Customisation
156 options

What sets it apart

A brake disc on the wrist

Two micro-drilled 316L steel bezels coated in black PVD, gripped by a four-piston caliper that acts as crown guard. In the configurator the caliper is painted in the colour of your choice, and the disc can turn grey if you wish.

Titanium, at 74 grams

The round 46 mm case is machined from solid titanium: the watch weighs 74 grams. Bezels, caliper and screws are made in Magny-en-Vexin, and the watch is then assembled by hand, nine-part pin buckle included.

Full dial or skeleton

The ETA 2824-2 calibre beats at 28,800 vibrations per hour, with a 38-hour power reserve. A full dial with date, or a movement skeletonised by B.R.M, whose winding bridge can be painted too.

What you design

Sixteen sections, each with its own colours and materials. The visual follows every choice.

  • Case 4
  • Dial 10
  • Automatic bridge painting 19
  • Hands 60
  • Crown 5
  • Crown groove painting 18
  • Crown protector 2
  • Crown protector painting 18
  • Lugs 2
  • Strap 113
  • Rubber strap buckle 3
  • Leather strap buckle 3
  • Fabric strap buckle 3
  • Logo at 6 o'clock 2
  • Crown marking 4
  • Engraving

Frequently asked questions

Is the DDF6-46 a chronograph?

No, it is an automatic three-hand watch: ETA 2824-2 calibre, 28,800 vibrations per hour, a 38-hour power reserve, and a date on full-dial versions. The chronograph with the same brake disc is the DDF12-46.

How big is the DDF6-46?

The titanium case is 46 mm in diameter, with a lug width of 22 × 19 mm, and weighs 74 grams. It is water-resistant to 100 metres, with sapphire crystal front and back.

What can be customised?

The case (4 titanium finishes, black or grey disc), the dial (10, from black to carbon, azure blue and skeleton movement), the hands, the crown and its groove paint, the crown guard and the caliper paint, lugs, strap, buckle, a logo at 6 o'clock, crown marking and engraving: twenty-four characters on the caseback or on the oscillating weight, except on a skeleton movement.

How much does a custom DDF6-46 cost?

It starts at €3,790. The price updates with every choice in the configurator, before you order.

Where is it made?

In Magny-en-Vexin, where Bernard Richards founded the manufacture in 1986: the case is machined from solid there, the bezels, caliper and screws are made there, and the watch is then assembled by hand. It carries a three-year warranty, in addition to the legal guarantee of conformity.

Your DDF6-46, piece by piece

Design it in a few minutes, in 3D, and save it to come back to later.