Chronograph

Mechanical chronograph: how it works, and B.R.M chronographs

Pushers, counters, Valjoux 7753, skeletonisation: the guide from the manufacture in Magny-en-Vexin.

A chronograph is a watch that measures, in addition to the time, a short duration: it is started, stopped and reset to zero with two pushers. All the chronographs in the B.R.M Chronographes catalogue are mechanical, self-winding, on a Valjoux 7753 calibre; the workshop in Magny-en-Vexin skeletonises some of them by hand. From the piston-shaped V12-44 to the 47-gram MK-44, this is how they function.

What is a chronograph for?

To time without touching the hour: a circuit lap, a stage, cooking time, a speaking slot. The time continues to advance during the measurement; the chronograph is a mechanism added to the movement, which the pushers engage and disengage on demand.

A chronograph should not be confused with a chronometer. A chronometer is a watch whose precision has been certified by an official body, whether or not it has a chronograph function. The former measures, the latter is precise: a watch may be one, the other, or both.

Pushers and counters: how to read a chronograph

On B.R.M chronographs, the Valjoux 7753 calibre is operated as follows:

  • The pusher at 2 o'clock starts then stops the chronograph; a further press restarts it where it had stopped.
  • The pusher at 4 o'clock resets the measurement to zero, once the chronograph is stopped.
  • The central chronograph seconds hand counts the seconds of the chronograph, over 60 seconds.
  • Two counters totalise the minutes, up to 30, and the hours, up to 12.
  • The small seconds hand rotates continuously: it shows that the watch is running.
  • The date is corrected by a corrector positioned at 10 o'clock.

A measurement of 1 h 12 min 25 s is therefore read as: 1 on the hour counter, 12 on the minute counter, 25 on the central seconds hand. On a chronograph fitted with a tachymetric scale, the same seconds hand gives an average speed over one kilometre: see the automotive watch.

Automatic or manual-winding chronograph?

A mechanical chronograph draws its energy from a mainspring barrel. On a manual-winding calibre, it is wound via the crown, generally each day. On an automatic calibre, an oscillating weight, which rotates with the movements of the wrist, takes care of this; the crown can still restart a watch that has remained stationary.

All B.R.M chronographs are automatic. The Valjoux 7753 maintains 46 hours of power reserve; on models with a sapphire caseback, its oscillating mass is visible on the reverse of the watch, and the workshop can engrave twenty-four characters upon it, at no extra charge.

The Valjoux 7753, calibre of B.R.M chronographs

The Valjoux 7753 is a Swiss automatic chronograph calibre, produced by ETA. On B.R.M specification sheets, it is described as follows: 27 jewels, 28,800 vibrations per hour, 46 hours power reserve, 7.90 mm thickness, stop seconds, date. It is a proven and widespread base in watchmaking, which the manufacture's watchmakers service themselves: all B.R.M servicing is carried out in Magny-en-Vexin.

The three-hand watches from the manufacture use the ETA 2824-2 or, for smaller diameters, the ETA 2671. In all cases, the calibre is never screwed directly to the case middle: it rests on shock absorbers, at least three, and six on the V12-46-SA, three of which have progressive-pitch springs.

The skeletonised chronograph, hand-pierced

For its skeletonised chronographs, the workshop starts with the Valjoux 7753 and removes material by hand until only the working parts remain; the specification sheets then bear the mention "Calibre Valjoux 7753 skeletonised by BRM". The dial is openworked so that the movement can be seen in operation. Full details, with photographs from the workshop: the skeletonised chronograph according to B.R.M.

B.R.M chronographs

  • V12-44, the piston-shaped chronograph: 44 mm steel case machined from solid, oversized pushers and crown, 100 g. From £6,020 with the V12-44 White.
  • V8-44: same calibre, same diameter, bevelled case, dial most often in carbon. From £6,550 with the V8-44 Classic.
  • DDF12-46 : boîtier de 46 mm en titane, lunette en disque de frein, 95 g. 7 060 € pour la DDF12-46 Red, 12 890 € pour la DDF12-46 Squelette Blanche.
  • V12-46-SA: calibre skeletonised by the workshop and suspended on six shock absorbers, 46 mm stainless steel, titanium and stainless steel case, 110 g. From £7,600 with the V12-46-SA Red.
  • MK-44: 44 mm Makrolon® case, titanium lugs and crown, skeletonised movement, 47 g. 10 430 € for the MK-44 Orange.
  • R11-41 Bronze: round 41 mm bronze case, black dial with three counters, tachymeter on the crystal. 6,790 € for the R11-41 Bronze.
  • V12-44 Damier Squelette: chequered black PVD-treated titanium, skeletonised dial. £16,270 for the V12-44 Damier Squelette.

Au configurateur, la V12-44, la V8-44, la DDF12-46, la V12-46-SA and the MK-44 se composent pièce par pièce : voir the bespoke watch.

A chronograph for women?

The B.R.M chronographs measure from 41 to 46 mm: the Valjoux 7753 requires space. For a slim wrist, the R11-41 Bronze is the most compact; the watches from 25 to 38 mm in the For her collection are automatic three-handers.

Frequently asked questions

A chronograph measures short durations using pushers and counters. A chronometer is a watch whose precision has been certified. A watch may be one, the other or both.

On a B.R.M chronograph, pressing the pusher at 2 o'clock starts the timing, a second press stops it; the pusher at 4 o'clock resets it to zero. The seconds are read on the central seconds hand, the minutes and hours on the counters.

A Swiss automatic mechanical chronograph calibre: 27 jewels, 28,800 vibrations per hour, 46 hours of power reserve, 30-minute and 12-hour counters, date. It equips all the chronographs in the B.R.M catalogue.

No, if it is worn every day: the oscillating weight winds it. Left motionless for more than 46 hours, it stops and restarts with a few turns of the crown.

From 6 020 € for the V12-44 to 16 270 € for the V12-44 Chequered Skeletonised, prices including VAT. On the configurator, a bare DDF12-46 starts at 6 490 €.

Yes: the MK-44, the V12-46-SA and the DDF12-46 Skeleton have a Valjoux 7753 calibre skeletonised by hand in the Magny-en-Vexin workshop.